Dry Stack Storage for the 21st Century
When you absolutely, positively need an upside
Let’s build something together
5:00 AM, July 4th?
We understand the risk to your operation during peak demands. A Rack ‘N Roll system is designed to mitigate those risks:
- Rack ‘N Roll systems are durable. Minimum design factors are 1.25 – meaning the wheels, bearings, motors, and drives are designed for 25% larger than anythin you’ll load in the rack. Why? Longetivity. Components that are worked below their designed strength last. Less wear. Less fatigue. Less heat. It’s that simple
- The machinery, motors, brakes, and redurcers are all redundant. Lose a brake? The system will drive through the failed brake to keep you running. Lose a motor? The other motor is sized to take the load and continue moving. Lock up a gearbox or bearing? One bolt and one cable plug, and you can remove the motor in 10 minutes.
Why? Because in our mind, it’s always 5:00 AM, July 4th
Are any of these your current situation?
How much more revenue would you make with 44% – 83% more boats in storage? Including service and fuel?
A Rack ‘N Roll system uses an aisle approximately 1/6 the size of the standard shed
Still dinging boats? Testing the limits of rub rails? Paying for gel repairs?
A Rack ‘N Roll system eliminates the need for operators to swing the vessel in a confined area
How much revenue are you making from the 45-60% of your dry stack set aside for the forklift aisle?
A Rack ‘N Roll system uses 81-93% of that space
Are you being driven to buy a new lift to accommodate larger boats?
A Rack ‘N Roll system does not require new, short wheelbase lifts
Do you need two people at the stack when loading and unloading?
A Rack ‘N Roll system does not require a spotter – the operator drives straight in and backs straight out to move any vessel
In Motion
When your crew is moving, so is our system. Not matter the size of the stack, we can move one boat to any other position in less than a minute. We can even accommodate multiple lifts during those peak load periods. Whether four, seven or twelve rows deep, we will keep you moving.
Benefits and Features
- Systems for 21′ to 70′ – Suitable for Indoor OR Outdoor
- Outdoor rack systems designed to resist winds to local code
- Systems greater than 48′ utilize fixed rack pods and mobile transporters
- Operate on 230v single or three phase power, or 480v three phase
- All structures are galvanized & built to AISC building steel guidance and supplied with a PE stamped drawing from http://www.boatracks.com
- Options for operation span from the simple and mill duty radio transmitters to robust touchscreens
- 21′-42′ racks utilize bunk boards (hardware supplied, but boards and covering by owner)
- 42′-70′ racks utilize poured in place high density urethane foam at the keep and sideboard contact points
- Options available for overhead or three sided UV sun shades
Client Testimonials
“Our RackNRoll system is proving to be a great financial asset. I provides a solution to the problem of “not enough room to expand”. The very few hiccups along the way were very quickly addressed and resolved to 100% satisfaction.”
